2417010022 Repair Kit: Specifications, Components, Compatibility & Injector Guide
When an older mechanical diesel injection pump begins showing sealing problems, replacing the entire pump is not always necessary. In some cases, the main pump components remain serviceable while the gaskets, O-rings, and other sealing parts have reached the end of their useful life.
The 2417010022 fuel injection pump repair kit, also referenced as 2.417.010.022, is designed for this type of sealing-related service. It is commonly associated with compatible PE(S)8P fuel injection pump configurations, including versions using S7100 and S7800 governor configurations.
This guide focuses on the information buyers and diesel workshops usually need before ordering: 2417010022 specifications, kit contents, compatible pump configurations, injector compatibility, performance considerations, repair scope, and product identification.
1. What Is the 2417010022 Repair Kit?
The 2417010022 Repair Kit is a gasket and seal service kit for selected mechanical diesel fuel injection pumps.
Its purpose is to replace worn sealing components while allowing a serviceable injection pump to remain in use. It is not designed to replace the pump's major precision components.
The main identification references are:
- Part Number: 2417010022
- Alternative Reference: 2.417.010.022
- Product Type: Diesel fuel injection pump repair kit
- Service Type: Gasket and seal replacement
- Associated Pump Family: PE(S)8P configurations
- Known Configurations: S7100 and S7800 governor variants
- Application: Mechanical diesel fuel injection pump servicing
The kit is therefore best considered a sealing service solution, rather than a complete fuel injection pump rebuild package.
The original product information specifically identifies 2417010022 as a gasket and sealing kit for compatible PE(S)8P configurations and distinguishes it from precision-component overhaul kits.
2. What Are the Specifications and Contents of 2417010022?
For buyers comparing different fuel injection pump repair kits, both the part reference and the component scope matter.
2417010022 Specification Overview
- Reference Number: 2417010022
- Equivalent Reference Format: 2.417.010.022
- Pump Type: PE(S)8P configuration
- Governor References: S7100 / S7800 variants
- Kit Category: Gasket and seal service kit
- Primary Purpose: Renewing aged or damaged sealing components
- Installation Type: Injection pump service and reassembly
- Intended Users: Diesel workshops, pump specialists, distributors, and maintenance teams
What Components Are Included?
The kit is primarily composed of sealing-related parts. Depending on the specific kit version and supplier packaging, typical components can include:
- Gaskets — seal mating surfaces between pump components
- O-rings — seal selected covers, ports, and service locations
- Sealing rings — maintain sealing at designated pump points
- Washers — support sealing connections and service locations
The exact quantity and design of individual components should be confirmed against the supplied kit before installation. The source material also notes that kit contents can vary by version and supplier packaging.
What Is Not Included?
2417010022 should not be confused with a complete precision-component overhaul kit.
It does not normally replace:
- Plunger
- Pump element
- Cam-related components
- Governor assembly
- Drive shaft
- Other major internal precision components
If inspection reveals significant wear in these areas, additional parts or a more comprehensive pump rebuild may be required.
3. Which Pumps Are Compatible With 2417010022?
The most important compatibility information associated with 2417010022 is the PE(S)8P fuel injection pump configuration.
The reference is also associated with:
- S7100 governor configurations
- S7800 governor configurations
However, compatibility should not be determined from the engine model alone.
A complete injection pump number provides a much more reliable basis for checking whether the repair kit is appropriate.
Why Does the Complete Pump Number Matter?
Similar diesel engines can use different pump specifications because of differences in:
- Engine version
- Equipment configuration
- Production period
- Governor specification
- Fuel-system configuration
- Pump calibration
Therefore, two pumps installed on similar engines may not necessarily use the same gasket and seal kit.
The original source specifically recommends confirming compatibility through the complete injection pump identification number rather than selecting a kit only from the engine or vehicle model.
Main Identification References
When searching for this product, buyers may encounter either:
2417010022 or 2.417.010.022
These references should be considered together with the complete pump identification information when confirming an order.
4. Is 2417010022 Compatible With Fuel Injectors?
One important point when researching this product is that 2417010022 identifies a fuel injection pump repair kit, not a fuel injector.
The pump and injector operate within the same diesel fuel injection system, but they are separate components with different identification and compatibility requirements.
Therefore:
- 2417010022 does not specify a particular injector model
- Injector selection should be verified separately
- The injector part number should not be used as the sole basis for selecting this repair kit
- Pump compatibility should be checked using the complete pump number
- Engine and equipment information can be used as supporting identification
How Do the Pump and Injector Relate?
The injection pump supplies fuel to the injectors according to the mechanical fuel-system design and pump calibration.
Because both components contribute to fuel delivery, a workshop may inspect the pump and injectors together when diagnosing an engine problem. However, replacing the pump's gaskets and O-rings does not automatically determine which injector should be installed.
If you are sourcing both products, provide the supplier with:
- Complete injection pump number
- Engine model
- Equipment or vehicle model
- Existing injector number, if an injector replacement is also required
This provides a clearer basis for matching each component separately.
5. What Performance Benefits Can a 2417010022 Repair Kit Provide?
The 2417010022 kit is not a performance-upgrade component. It does not increase the rated output of the injection pump simply because new seals are installed.
Its value comes from restoring sealing condition where aged or damaged sealing components are affecting the pump.
A properly serviced pump can benefit from:
- Reduced external fuel seepage
- Improved sealing at service points
- Reduced risk of air entering through compromised seals
- Better preparation for pump reassembly
- More reliable sealing after servicing
- Continued use of a serviceable existing pump
For example, a hardened O-ring or damaged gasket may no longer maintain the same sealing condition as the original component. Replacing that component can address the sealing problem without replacing otherwise usable precision parts.
However, a sealing kit cannot correct problems caused by a worn pump element, damaged plunger, governor fault, or other internal mechanical issue.
That is why technicians should inspect the pump condition rather than assume every performance problem comes from the sealing system.
6. When Is a 2417010022 Repair Kit the Right Choice?
The repair kit is most suitable when the pump requires sealing-related service and its main precision components remain usable.
A Good Candidate for a Sealing Repair
A compatible pump may be suitable for this type of service when:
- Gaskets have aged
- O-rings have hardened
- Sealing rings have deteriorated
- Fuel seepage comes from a serviceable sealing location
- The pump is being disassembled for scheduled servicing
- Major internal components remain within serviceable condition
When Is More Than a Seal Kit Needed?
A more comprehensive repair may be necessary when inspection identifies:
- Excessive plunger wear
- Pump-element damage
- Scoring of precision components
- Damaged cam-related parts
- Governor problems
- Drive-component wear
- Corroded or damaged sealing surfaces
The original source emphasizes that the repair kit is appropriate when the pump's major precision components remain serviceable, while significant internal wear requires additional repair work.
Why Can a Repair Kit Be More Practical?
If the existing pump is still mechanically suitable for the engine, replacing only the required sealing components can avoid unnecessary replacement of the entire injection pump.
It also gives technicians an opportunity to inspect the pump while it is disassembled and identify additional wear before returning the unit to service.
7. How Should You Identify and Order 2417010022?
Correct identification is the most important step before purchasing a 2417010022 repair kit.
Use the following information when requesting compatibility confirmation:
Pump Information
Provide the complete fuel injection pump number whenever possible.
Engine Information
Include the engine model as supporting information rather than using it as the only compatibility reference.
Equipment Information
If available, provide the truck, tractor, construction machine, or other equipment model.
Governor Information
If the pump documentation identifies an S7100 or S7800 governor configuration, include that information.
Injector Information
If injectors are also required, provide the existing injector part number separately.
Product Reference
Confirm that the required repair kit is identified as:
2417010022 / 2.417.010.022
For workshops and distributors, supplying these details before ordering can reduce the risk of receiving a sealing kit for the wrong pump configuration.
8. Other Repair Kit Guides and More Reading
- 2417010004 Fuel Injection Pump Repair Kit
- 2417010021 Diesel Engine Fuel Injection Pump Repair Kit
- Fuel Injection Pump Repair Kit 2417010045
- Fuel Injector Pump Gasket Kit 2417010046
9. Frequently Asked Questions About 2417010022
Q1: What does the number 2417010022 identify?
It identifies a fuel injection pump gasket and seal repair kit associated with compatible PE(S)8P configurations.
Q2: What is the difference between 2417010022 and 2.417.010.022?
They are two reference formats used for the same repair kit identification.
Q3: Does 2417010022 include the pump element?
No. The kit is primarily intended for gasket and seal replacement. A pump element or other precision components are outside its normal scope.
Q4: Can I select 2417010022 using only my engine model?
It is not recommended. The complete injection pump identification number should be checked because different pump configurations can be used within similar engine applications.
Q5: Does 2417010022 fit S7100 and S7800 pumps?
The reference is associated with compatible PE(S)8P configurations that include S7100 and S7800 governor variants. The complete pump number should still be verified before ordering.
Q6: Does 2417010022 come with a compatible fuel injector?
No. The repair kit is for the injection pump sealing system. Injector selection is a separate compatibility process.
Q7: Can the kit fix every injection pump fuel leak?
No. It can address leaks caused by deteriorated sealing components within its scope. Leaks caused by damaged housings, shafts, precision components, or other mechanical problems require additional diagnosis.
Conclusion
The 2417010022 Repair Kit, also identified as 2.417.010.022, is a sealing-focused service kit for compatible PE(S)8P fuel injection pump configurations, including applications associated with S7100 and S7800 governor variants.
Its main components are sealing parts such as gaskets, O-rings, sealing rings, and washers. It does not normally replace the pump's plunger, pump element, governor, cam-related components, drive shaft, or other precision parts.
For buyers searching for 2417010022 specifications, repair kit contents, compatible pumps, PE(S)8P applications, or injector compatibility, the most important distinction is that this product services the fuel injection pump, while injector identification must be handled separately.
Before ordering, provide the complete injection pump number, along with the engine and equipment information when available. This is the most reliable way to confirm compatibility.
Pioneer Diesel Parts supplies new aftermarket diesel fuel injection components for diesel workshops, distributors, and repair businesses. Contact us with your complete pump number for 2417010022 availability, compatibility confirmation, and wholesale pricing.
评论
发表评论